PN20 Electric Actuator Ball Valve , Stainless Steel 3 Way DN20 Ball Valve

 

PN20 Electric Actuator Ball Valve , Stainless Steel 3 Way DN20 Ball Valve

 

Features

  •  Brass for corrosion resistance, ductility at high temperature, and low magnetic  permeability
  •  Lever Handle for manual on/off control
  •  PTFE seats and gasket packing reduce the risk of leakage
  •  After assembling, test by water at pressure no less than 0.8MPA, no leakage.
  •  Female NPT thread for connecting to male threaded pipes.

 Technical Requirements

l  Before assembling, all parts will be cleaned, no oil or grease, remove al burrs and sharp edges.

l  Before connecting, body cap male thread should be coated with sealing glue

l  Handle turn or close freely.

l  After assembling, test by water at pressure no less than 0.8MPA, no leakage.

 

Application
HVAC system 
Heating system
Water treatment system
Industrial equipments
 
Operational mode
Winner control ball valve is motor-operated by a type of WVA4-1…, WAV4-2…, and WAV4-3… actuator. The actuator is controlled by a modulating on/off , 3-piont or proportional control system and move the ball of the valve, to the opening position dictated by the control signal.

 

Go Back to Products
Go Back to

Electric Water Ball Valve

Call Us Contact Supplier